 |
| Powered by phpBay Pro |
What amp should i use for 3 pioneer champion series 12'?
i have 3 pioneer champion series 12' and my question what amp should i use?
here's more info...
General
Brand Pioneer
Series Champion Series
Model TS-W307D2
Type Subwoofers
Component
Subwoofer Size 12"
Cone Material Composite IMPP Cone using Interlaced Aramid Fiber
Surround Material Wide Roll, Three-Layer Fiber Woven Radial
Voice Coil Single
Voice Coil Construction 4-Layer, Long Voice Coil, Copper Wire, Phenol Resin Coated Glass Cloth Bobbin
Damper (Spider) Aramid Fiber
Magnet Construction Double Mass High-Power (83oz)
Gasket Molded
Specification
Peak Power 1200W
RMS Power 400W
Frequency Response 18 Hz - 500 Hz
Sensitivity 89 dB
Impedance 1/4 Ohm
Mounting Depth 6.02"
Cut-Out Dimensions 12.87" x 6.77"
Feature
Feature Recommended Enclosure Use: 0.85 ~ 1.75 Cubic Feet
Integrated Single-Sided Silver Compression Terminals
Standard Top Plate
Projected Pole Yoke with Vented Pole
I would use a amplifer that is 1200 RMS watts or alittle more this would give you about 400 watts rms to each sub, you could use Kicker, Hifonics any good brand just as long as it has the right power.
|
 SIEMENS NFC3M1000 1000 AMP MOLDED CASE CIRCUIT BREAKER NIBBD  US $1,000.00
|
 Cutler Hammer 600 Amp Molded Case Switch LDB3600K US $1,000.00
|
 Square D Molded Case Circuit Breaker KAL36200 200 Amp US $1,000.00
|
 GE 1200 Amp Molded Case Switch w Shunt TKMA3Y1200 3P US $825.00
|
 USED WESTINGHOUSE MA3800WSK 800 AMP MOLDED CASE SWITCH US $800.00
|
 400 Amp Square D Molded Case Circuit Breaker LHP36400MT US $800.00
|
 Cutler Hammer JDC3250F Molded Case Breaker 200 AMP Trip 600 VAC 250 VDC US $700.00
|
 Cutler Hammer KD3400KW Westinghouse series molded case switch 400amp 3pole US $700.00
|
| Powered by phpBay Pro |