Cnc Robot

10397 GENESIS CNC ROBOTIC WELDING GRINDING WORK CELL
Paypal

US $150,000.00

Amada Astro 100 MHE 138 Ton 6 Axis CNC Robotic Press
Paypal

US $120,000.00

138 Ton Finn Power CNC 6 Axis Press Brake w Robotic Bending Cell
Paypal

US $99,500.00

Motoman 6 Axis CNC Welding Robot
Paypal

US $49,500.00

Mikron CNC Robotic Machining Center Multistep mfg 2000 as is
Paypal

US $48,000.00

ROBOTIC WELDING SYSTEM CNC Fanuc ABB robot new used
Paypal

US $35,000.00

Cnc Robot

People You Will Need When You Already Have A CNC Machine

If you think that you will just sit back and relax when you have a CNC machine in your shop, think again. CNC may help you speed up your own operations and even make them more efficient. However, CNC is not a “wonder robot” which can make you disregard all your workers and expect your store to run on auto-pilot.

Though you will require more people without the CNC technology, you will need only three very, really skilled people. Call these folks your friends, your team, whatever. In the long run, they might be just all that you should keep the shop in good shape.

The actual PROGRAMMER

The first person is the CNC programmer. S/he is like the "playmaker". S/he will create the actual programs that the CNC machines usually are meant to execute. Since the programs have been in the form of CNC codes fabricated like sentences, he should have perfected these codes because they work like a different language. The regular CNC machine can use up to 50 codes, so that’s like learning 50 new words for the newbie.

Also, the programmer should have at least and engineering or even machining degree. Remember that the CNC machine is only going to execute WHAT IT IS PROGRAMMED TO Perform. If the program is wrong, the whole operation goes down the drain with it. Moreover,s/he also needs to be flexible and have a fast turn-around because a CNC machine is often used to device a huge selection of different work-pieces.

THE OPERATOR

The second person that you need is the CNC operator. S/he will simply recheck the applications loaded to the machine and push the right buttons to find the work done. However, thinking that a CNC operator can have little if any SKILL AT ALL is incorrect. A CNC machine operator must have at least basic machining skills and s/he should have undergone some form of training to run a CNC machine.

These machines can produce very intricate motions, making it possible to make shapes that cannot be created on conventional machine tools. So, the operator should foresee this intricacy and know how to cruise by using it. The skills that an operator should have though, are lesser compared to the operators of conventional device tools.

THE TECHNICIAN

The 3rd person that will need is the CNC technician. Even though this may still be the programmer, it’s easier to always have a specialized expert on-call because in the long run, you may have more than one CNC machine and you may need to focus on over the other in case each gets crippled at the same time. Just like the programmer, the technician should also be flexible and state. CNC offers a lot of complexity whenever it’s running right, how much more if it’s behaving badly?

So, if you're having job openings with regard to positions that need to be handling a CNC machine, ask the applicants very first to do a demo for you personally and make sure that during the demonstration, they know what they’re doing. A test may also do wonders too. If they have no experience with any type of CNC machine, it is advisable that you encourage them to take short courses on CNC.

Eighty-hour courses are available online and hey, it’s better than nothing. Experts even encourage employers to hire CNC machinists who have finished AND Handed the National Occupational Competency Testing Institute (NOCTI) assessment just so they could be sure that their CNC machines will go to good hands. After all, a CNC machine is still an asset. Find out more upon http://cncrouterinfo.com/.