![]() |
| Powered by phpBay Pro |

How do I stop the seepage leak on a compression fitting and cap?
I have a pigtail of 1/4" copper tubing that I have to cap. The tubing comes out from a saddle valve attached to the copper pipe that feeds my bathroom sink. The house is plumbed with copper tubing and solder, so I can't just unscrew a length of pipe here.
I have an inline brass connector with compression fittings on either end. I have attached one of the compression ends to the copper tubing and have capped the other end with a brass cap for compression fittings.
I put Teflon tape on the threads of the cap end, but only used the compression fitting (nut and ferule) on the other.
I still get seepage from that fitting, no matter how tight I crank down the connection and cap. Last night, I cranked it down even tighter on both ends -- compression and cap -- and it actually leaked seepage faster (one drop of water every minute or two -- I haven't timed it).
What am I doing wrong? How can I make the fitting water tight? Or do I have another choice for capping the tubing?
Check out this link, it show about how far the ferrule should be on the pipe. If it to close to the end of the pipe you will probably never get it to quit leaking. You may also have a defective ferrule or fitting.
http://www.sealexcel.com/single-ferrule-compression-tube-fittings1.html
Hope it helps.
![]() |
![]() 10pcs SMA female nut to MMCX male right angle pigtail US $30.88
|
![]() 10 x SMA female nut to MCX male right angle Pigtail US $28.12
|
![]() 10 x pigtail SMA female with nut RG316 15cm US $22.80
|
![]() 20x SMA Female w Nut Straight Crimp RG178 Pigtail Cable US $15.99
|
![]() SMA female nut to QMA male right angle RG316 pigtail US $15.00
|
![]() 10x SMA Female w Nut Straight Crimp RG316 Pigtail Cable US $13.27
|
![]() Propane Gas LP 1 4 Nut Pigtail NoF273756 US $10.99
|
![]() 10x SMA Female w Nut Straight Crimp RG178 Pigtail Cable US $10.07
|
![]() Propane Gas LP 1 4 Pigtail Nut NoF276139 US $9.99
|
![]() Mr Heater 9 16 LH x Pol Male Nut Pigtail US $9.91
|
![]() 1 4 Nut and Pigtail by Mr Heater Corp F273756 US $9.79
|
![]() N female nut bulkhead to BNC male RG316 pigtail US $9.78
|
![]() Mr Heater F273756 Propane Gas LP 1 4 Nut Pigtail NEW US $8.99
|
![]() Mr Heater F273757 Male Nut Pigtail 9 16 Left Hand POL NEW US $8.99
|
![]() Mr Heater F276139 Male Nut Pigtail 1 4 MPT NEW US $8.99
|
![]() Marshall Gas Controls Pigtail ACME Nut 15 US $8.00
|
![]() Mr Heater F273756 1 4 NUT PIGTAIL US $7.87
|
![]() N female with nut to MCX male Pigtail RG174 RG178 RG316 US $7.60
|
![]() SMA Male to TNC Female Nut Bulkhead Adapter Antenna Pigtail Cable US $7.42
|
![]() BNC Female nut to MMCX right angle Pigtail RG316 RG178 US $7.34
|
![]() TNC female with nut to MC Card male Pigtail cable US $7.32
|
![]() IPX ufl to MCX female with nut connector pigtail cable US $6.25
|
![]() UFL IPX to RP TNC Plug nut Pigtail for Wlan Mini Pc US $6.25
|
![]() RP N male to RP TNC female nut bulkhead pigtail RG316 US $6.00
|
![]() N female nut bulkhead to RP TNC male LMR195 pigtail 40 US $5.70
|
![]() N female to BNC female nut bulkhead LMR195 pigtail 40 US $5.70
|
![]() 5x SMA Female w Nut Straight Crimp RG178 Pigtail Cable US $5.59
|
![]() N female nut bulkhead to RP SMA male LMR195 pigtail 40 US $5.50
|
![]() N female nut bulkhead to SMA female LMR195 pigtail 1M US $5.50
|
![]() N female nut bulkhead to SMA male LMR195 pigtail 40 US $5.50
|
![]() SMA Jack with nut bulkhead crimp for RG58 pigtail US $5.40
|
![]() N female nut bulkhead to SMA male straight RG58 cable pigtail 50cm US $5.31
|
| Powered by phpBay Pro |


US $193.64




















































































