 |
| Powered by phpBay Pro |
Instruction you Must follow while working with electrical test equipment
Electrical test equipment or “testgear" is operated to manufacture signals and obtain reactions from electronic machines that are put under check.Through this trial, a proper process of the assorted devices can be easily qualified and proven for the slight or major errors which can thus be examined and later mended.
These electric testing equipment are very useful and also needed for any type of serious work required on the electronic systems. The electronic test equipments practically need assorted types of equipment which may vary from reasonable and straightforward to the complex and costly instruments such as the Automatic Test Equipment based on the necessitate or the intricacy of the problem. Generally, a expert test gear is necessitate when creating circuits and systems as evaluate to creation testing or when troubleshooting for manufacture units accessible in the field.
The following tools are employed for basic measurement of currents, voltages and components in the electric circuit under testing.
•Ohmmeter: This equipment ckecks the resistance.
• Voltmeter: An equipment that measures voltage.
•Ammeter, e.g. Milliameter or Galvanometer- ckecks current
•Multimeter, e.g. Digital Volt meter or Volt Ohm-Miliametre- it meausres current, voltage and resistance.
Following are the tools that are used for circuit stimulus:
• Signal Generator
• Power Supplies
• Pulse Generator
• Pattern Generator
Following are the apparatus that are applied to investigate the response of an electric circuit that is put under analysis.
• Frequency Counter: helps in calculating frequency
• Oscilloscope
• testing probes: Rs probes and Signal Generator
There are certain instructions that must be followed when working with the Electrical Test Equipments, which include:
• examine the electrical test equipment before use and do not use in case they are found defective.
• An Electrical Test Equipment should only be applied for the specified application. You should read the functional instructions before using the test equipment.
• Electrical test equipment must be verified for exact operation instantly before and after use. One should make sure that the electric circuit doesn’t get re-energized by the stored electrical or mechanical energy while working at zero energy checks.
• The energized parts in the circuit that are functioning at a current less than 30 volts or with a potential current that is less than 1 milliamp do not want de-energization.
• Electrical apparatus effective at 30 volts or more with a potential current of 1 milliamp or more should be de-energized before they are mended.
• the various possible risk views should be documented properly and should also include the dangers and the protective instruments gloves, pads, insulated barriers, blankets etc. for all types of jobs.
• The work area should be inspected for safe access and sufficient illumination. Hence, before you initiate using the electric test equipments, you should verify for your protection that there are no any types of undocumented menace resting around in the work place.
• Do not carry or carry any conductive ornaments like bracelets, rings, metal frame glasses, watches, metal hats etc. Avoid using anything that can make collide with the uncovered energized parts.
• You should carry natural fiber completed clothes for your protection when you are probable to work with high energy related circuits with an energy level of above 150 volts.
• under cases where you catch shocks, you should ask the aid of a supervisor before you again restart back to your work.
You should be extremely careful when using any of these Electrical test equipments. To find the main cause to all the problems, you need a good electrical qualified with a perfect multimeter.
|
 Tektronix P6202A FET Oscilloscope Probe  US $879.99
|
 Tektronix TDS 460A Digitizing Oscilloscope with probes US $850.00
|
 Tektronix THS720A Digital Oscilloscope 100MHz DMM w 2 Probes US $850.00
|
 Tektronix TDS 410A 200mhz 100 MS s Two Channel Digital Oscilloscope P6103 Probes US $499.94
|
 Tektronix P7260 Active Oscilloscope Probe 6 GHz US $499.00
|
| Powered by phpBay Pro |