 |
| Powered by phpBay Pro |
Advances in Coordinate Measuring Machine Probe Calibration
When needing to take the exact measurements of an object one of the best and most efficient ways of doing so Is by using a Coordinate Measuring Machine. In order to assure proper function, however, the coordinate measuring machine should be calibrated so as to generate accurate measurements. Unfortunately, the calibration process can take be long and tedious with the need to continuously check the machine for proper operation. In fact, it's not uncommon for hours to be allocated before machine operation in order to properly calibrate the device.
The reason for such a strenuous calibration process is due to a few factors – all of which run a great risk of influencing the measuring capability of the machine thus resulting in a greater chance of operational errors. One of the largest factors that can influence the CMM's measuring capability is outside "noise". Any sort of outside motion must be dampened before it reaches the sensory probe that does the vast majority of the measuring. Aside from that, the probe itself along with the data cables must be protected from both physical damage and electromagnetic interference that may occur if there are devices in near proximity that generate powerful electromagnetic waves.
Since the calibration process mainly involves the probe there have been advances in rapid coordinate measuring machine probe calibration. This reduces the probe calibration time significantly and thus increasing the CMM's operational time. Other calibration advances such as "rapid inferred head calibration" achieve a significant reduction of risk of error along with a reduction in calibration time.
An example of such probes is Renishaw probes. These Renishaw probes are equipped with that very same rapid inferred calibration feature which enables them to accurately determine the head orientation and the probe position in one single operation. This allows the machine operator to perform accurate measurements at any head angle.
Renishaw probes also have the option to be hooked up with a camera that allows the CMM operator to confirm the proper measurement area. This makes them valuable tools in any environment that utilizes a CMM. The time saved for calibration along with enhanced ease of use and probe protection make it easier for the CMM to measure objects correctly.
About the Author
For More Information, please visit our website at www.cmmxyz.com.
|
 Optical Associates INC 316 UV Power Meter with Probe  US $1,699.00
|
 4 x 17 OZ Racing Power Alloy Wheels Toyo Tyres FORD PROBE 89 94 US $1,640.11
|
 Rohde Schwarz NRVS Power Meter with URV5 Z2 Probe US $1,650.00
|
 HP 1141A Differential Probe 1142A Power Module US $1,199.00
|
 Agilent HP 1143A Probe Offset Control and Power Module US $1,195.00
|
 17 FORD PROBE 89 94 Power Alloy Wheels Only US $1,069.43
|
 Hewlett Packard 1142A Probe Control and Power Module No probe US $465.50
|
 Master Kit Of Brake Bleeding Adapters PPRBAKIT01 US $457.79
|
 NEW Power Probe 3 Master Kit PPKIT03 US $448.49
|
 Boonton SET Power Sensor Adapter RF Probe US $400.00
|
 Varian 0991 K9565 301 Leak Detection Power Probe US $399.00
|
 Power Probe BAKIT01 Master Kit Of Brake Bleeding Adapters US $391.78
|
 Power Probe Master Combo Kit PPKIT03 US $339.99
|
 Banks Six Gun Tuner 99 03 Ford Super Duty 73L Diesel US $332.15
|
 Agilent N2772A 20MHz Differential Probe w N2773A Power Supply US $330.00
|
 Power Factor Meter Multi Meter Amp Probe US $329.00
|
 Agilent 1142A Power control Module 1145A Dual active probe US $425.00
|
 New Macken Laser Power Probe P100Y 0 100 Watt 29268 US $325.00
|
 FLUKE 80i kW 80i 500s AC DC CURRENT POWER PROBES US $324.99
|
 Power Probe PPKIT03 Master Combo Kit US $316.38
|
 Agilent 1120A 001 Active Probe 1X 500MHz needs 1122A power All accessories US $315.00
|
 FLUKE 80i Kw Current Power Probe US $300.00
|
 FLUKE RELIABLE POWER METERS CURRENT PROBE 6 US $300.00
|
 FLUKE RELIABLE POWER METERS CURRENT PROBE 5 US $300.00
|
 FLUKE RELIABLE POWER METERS CURRENT PROBE 3 US $300.00
|
 FLUKE RELIABLE POWER METERS CURRENT PROBE 2 US $300.00
|
 FLUKE RELIABLE POWER METERS CURRENT PROBE 1 US $300.00
|
 Power Probe Master Test Kit US $299.99
|
 Tektronix Inc TEK AM 503 Current Probe Amplifier with TM 501 Power Mod US $299.99
|
 POWER PROBE PPKIT03 Power Probe Master Combo Kit US $299.79
|
 Agilent HP 1142A Probe Control and Power Module Untested US $299.00
|
 Tektronix 1101A Probe Power Supply Untested US $295.00
|
| Powered by phpBay Pro |