 |
| Powered by phpBay Pro |
Safety Tips to Building a Computer
There are some important precautions you should take into account when building a computer to ensure the safety of you and your computer parts. This article gives you some helpful tips on building your computer in the safest way possible.
Stay Safe With Electricity
Electricity is an important issue to consider with dangerous implications for those who ignore it. When building your computer, be 100% sure that the power supply is disconnected from the mains. Also make sure that all network cables and telephone lines are disconnected from the computer.
Another electricity safety tip is to only turn the power on to your computer when the case cover is on. Don't ever work on the inside of your computer with the power plugged in and turned on.
Be Aware of Static Electricity
Static electricity is a real hazard than can cause significant damage to your computer components. To prevent this from happening, follow these simple tips:
- Always wear an antistatic wrist band when building your computer.
- Keep sensitive components in the antistatic bags that they came with, and only remove them from the bag when you are ready to install that component.
- Try to handle your computer components by their edges only.
- Avoid building your computer in areas of high static such as carpeted areas. If you can, try to avoid wearing clothing such as those made of synthetics as they may create static.
Use the Right Tools for the Job
These days, building a computer doesn't require many tools at all. But if you're going to be using a tool, make sure you use the right one for the job. Some tools that you may need for assembly are:
- Phillips screwdriver
- Flat nose screwdriver
- Pliers
- Antistatic wrist band (highly recommended)
- Nut driver (optional)
Conclusion
After reading this article you should now be aware of the main safety issues you need to consider when building a computer. Follow this advice and you will greatly reduce the risk of damaging your computer, or yourself.
About the Author
Check out Julien's website on How to Build Gaming Computers for more information on building your own gaming PC.
|
 400 AMP DISCONNECT SAFETY SWITCH DH365NGK  US $700.00
|
 ITE Bulldog F 355 Safety Disconnect Switch US $699.99
|
 3 SQUARE D SAFETY SWITCH DISCONNECT 30 AMP 240V NEMA 3R US $699.99
|
 new siemens Hf324n safety switch disconnect 240v 200 amp 3 pole fusible US $550.00
|
 TH3364R GE OUTDOOR NEMA 3R SAFETY SWITCH 200A 600V 3P FUSIBLE DISCONNECT NEW US $550.00
|
| Powered by phpBay Pro |