![]() |
| Powered by phpBay Pro |

Technical Help?? Remote control Cars!?
I am a year 10 student doing a G.C.S.E technology project at school. My project is to build a T.V remote holder with a system to find the T.V remotes if they are lost. As part of my project, i plan to embed a transmitter and receiver device from a Radio Controlled Car into my design. I want to basically replace the motor in the circuit board of the RC Car with a buzzer so that when i move the stick on the controller up, the buzzer sounds. I will then clip the circuit board of the RC Car to the back of the T.V Remote. I have to cut the circuit board down in size so that i can clip it to the back of the remote with a buzzer. Have you any ideas as to what i could do? Thank you very much for your time and help.
RC cars usually use a SERVO system to engage power to the drive motor.
Keep the servo, but exchange the motor for a Buzzer, simple, but a very expensive way of doing it.
A much cheaper way would to be to not use the (multi channel) R/C circuits from a car, but something simple like a digital, singe channel TX/RX circuit like ....
http://www.maplin.co.uk/module.aspx?ModuleNo=22965&doy=15m6
advantages for Transmitter & Receiver Pair
low cost , £10 a pair
Transmit range up to 70m
Wide operating voltage (2-14V)
Easy to build and test
Available from Maplin
The TX/RX pair could run off the batteries in the remote (as it will go down to 2v)
Part VY48C
![]() |
![]() Rosemount 0205134012 Pressure Transmitter Circuit Board US $29.99
|
![]() Rosemount 3151 1512 3 Transmitter Part Circuit Board US $24.99
|
![]() Rosemount 753 3104 0005 PWB Transmitter Circuit Board US $21.99
|
![]() Rosemount 0303127310 Pressure Transmitter Circuit Board US $18.99
|
![]() Rosemount 3151 3501 1008 PWB Transmitter Circuit Board US $18.99
|
![]() Rosemount 3151 1541 3 PWB Transmitter Circuit Board US $18.99
|
![]() Rosemount 030212738 Pressure Transmitter Circuit Board US $11.16
|
![]() Rosemount 0205134021 Pressure Transmitter Circuit Board US $11.16
|
![]() FM Transmitter Circuit Board Kit FCC Part 15 Certified US $9.99
|
| Powered by phpBay Pro |


US $299.99



















