 |
| Powered by phpBay Pro |
how do you attach stereo ground wire to 95 dodge neon?
I am installing a new sony stereo to a 95 dodge neon. I can figure out what to do with all of the stereo wires and how to splice them with the harness but i don't understand the ground wire connection. it is the black wire coming out of the stereo. I am using this site http://www.installdr.com/InstallDocs/DCP/PDF/327013.pdf
the part about connecting the ground wire is confusing. The only tools i have is a soldering iron and electrical tape.I dont have a crimper. How should i do this? How do I connect the ground wire or what do i connect it to. Please explain as best as possible...thanks
i have the snap wire harness but it doesnt have a wire for the ground wire to connect to. it just has a mute wire that is extra besides the necessity wires. do i need to screw that wire that was in the back of the old radio with the ring terminal to the back of the new radio....and does that have something to do with the new ground wire or can it help me with the ground wire.
you should get the proper connection either the male tab spade or the ring terminal. The spade is especially important with the Infinity systems.
If no infinity you can solder to the black wire in the factory harness. Or you can drill a hole and tap a screw to it to connect the black wire to a good ground (frame or body).
You would make life allot easier by just buying the snap wire harness....
(edit)
Sounds like you need to locate the factory ground wire that attached to the old radio and attach it to the black wire on your new radio. You can do this by cutting off whatever connector is on it and soldering it together with the black wire onteh new radio.
|
 HUSKIE HYDRAULIC CABLE WIRE CRIMPER WITH BURNDY DIES GREAT SHAPE  US $799.99
|
 PERKINS JUNIOR WIRE CRIMPER 2 TON PRESS US $700.00
|
 HYDRAULIC WIRE CRIMPERS CRIMPING PLIERS TOOL 130KN US $599.99
|
 WIRE STRIPPER AMP CRIMPER APPLICATER 687926 2 US $350.00
|
 WIRE STRIPPER AMP CRIMPER APPLICATER 2460 2 US $350.00
|
 HUSKIE R 5584 HYDRAULIC CABLE WIRE CRIMPER WITH DIES 1 LK US $349.99
|
 HUSKIE R 5584 HYDRAULIC CABLE WIRE CRIMPER WITH DIES 2 LK US $349.99
|
 THOMAS BETTS TBM6S CABLE WIRE CRIMPER WITH 6 DIES LK WOW US $349.99
|
 HYDRAULIC OPERATED REMOTE CABLE WIRE CRIMPER US $349.99
|
 HYDRAULIC WIRE CRIMPERS CRIMPING TOOL 10 TON US $299.99
|
 AMP Wire Crimper part 291146 US $299.99
|
 TYCO AMP 91510 1 Certi Crimp 2 SAHT tool crimper wire 18 to 24 AWG US $299.99
|
 NEWHALL PACIFIC WIRE CRIMPER STRIPPER GREAT SHAPE 734 735 US $199.99
|
 NEWHALL PACIFIC WIRE CRIMPER STRIPPER GREAT SHAPE 734 735 2 US $199.99
|
 THOMAS BETTS HYDRAULIC CRIMPER FOR WIRE CABLE LK US $199.99
|
 Wire Ferrule Crimper Greenlee K28gl US $165.00
|
 THOMAS BETTS TBM6S CABLE WIRE CRIMPER GREAT SHAPE US $159.99
|
 MECHANICAL ROTATING DIE LEVERAGE WIRE TERMINAL CABLE LUG CRIMPER US $200.00
|
 Amp 46063 Wire Crimper Crimping Tool US $98.75
|
 8 TON HYDRAULIC WIRE CRIMPER TOOL 12 00 GA MAGNETIC DIE US $95.90
|
| Powered by phpBay Pro |